How to add IPTV channels to
TVIP Box (New version)
If you have a new TVIP box, like the 605 or 615, you can follow this tutorial to set it up. If you have an older model, such as the 410, you’ll need to either update its operating system or refer to the guide for older versions.
Setup process, Follow the steps below ↴
Step 01 Primary Setting
First, turn on your TVIP box and set your primary settings, such as language and time. From the main menu, scroll down to “Settings” and select “TV.”
Step 02 Establish Web Portal.
Update the Content Source to ‘Web Portal’ and click on ‘Establish Web Portal.
Step 03 Portal URL
Switch the API Mode to “MAG.” Then, enter your portal server address in the “Portal URL” field (you can get this from your IPTV provider) and click “Apply” followed by “Restart.” Make sure to add your device’s MAC address to your IPTV dashboard or give it to your IPTV distributor. ” To locate the MAC address, look at the back of the TVIP box.
Step 04 Load your playlist
After the box restarts, go back to the main menu and select “Watch TV.” It may take a few minutes for the portal to load your playlist.
Step 05 choose any channel
The channels will appear automatically. You can choose any channel you want to watch and start streaming.
Adding IPTV
Channels Using M3U URL
To add channels using an M3U URL, follow these steps during Step 2 of the setup:
1. Change the Content Source to “M3U Playlist” and click on “Setup M3U Playlist.”
2. Enter the M3U URL you received from your IPTV provider, then click “Apply” and “Restart.”
Older TVIP Boxes, Follow the steps below ↴
Step 01 Setting
From the main menu, select “Settings.”
Step 02 Web Portal
On the right menu, select the “TV” icon, then change the Content Source to “Web Portal” and click on “Setup Web Portal.”
Step 03 Portal URL
Enter your portal server address in the “Portal URL” field (available from your IPTV provider) and click “Apply.” Remember to add your device’s MAC address to your IPTV dashboard or give it to your IPTV distributor. You can find the MAC address on the back of the TVIP box.
Step 04 Load your playlist
After entering the portal server address, wait a few minutes for the portal to load your playlist.
Step 05 choose any channel
The channels will appear automatically, allowing you to choose any channel and start streaming.
Adding IPTV Channels
Using M3U URL (Older Versions)
For older versions, you can follow the same steps as mentioned above for the M3U setup to add channels.
Conclusion
Adding IPTV channels to your TVIP Box (new version) is easier than you might think. In just a few simple steps, you can set up your favorite channels and start watching right away. This guide will walk you through the process, whether you’re setting up IPTV for the first time or updating your current setup. Follow along, and you’ll have your channels added and ready to go in no time!